Machine Room Less Elevator

• Travel: Maximum of 50’0″ (minimum 12 inches between stops)
• Speed: 40 feet per minute
• Rated Capacity: 1,000 pounds
• Pit depth: 6” minimum (8 inches preferred)
• Stops: Two
• Opening: Single
• Overhead: Minimum of 8’0″ (96 inches) with remote controller; minimum of 9’0″ with controller in hoistway with a 7’0″ interior car height
• Warranty: Three-year limited parts

• Slack chain safety device
• Two upper and one lower final limit
• Machine stop switch
• Motor controller supply disconnects (located in controller)
• Car light supply disconnects (located in controller)
• Pit stop switch
• Car-top stop switch
• In-car emergency stop switch and alarm
• Safety switch for car gates/doors
• Battery backup emergency car lights and alarm
• Electro-mechanical hoistway door locking devices (doors by others)
• Enhanced gate/bypass monitor

• Programmable Logic Controller (PLC)
  •  Located in shaft in machine room-less application
  • Located within 50 feet of motor in machine room
• Non-selective collective automatic operation
• S.M.A.R.T. system (Self-Monitoring Alert Response Technology)*
• Car Operating Panel (COP) with LED floor position indicator §
• Recessed phone box (phone jack included) §
• Hall stations with call button and LED floor position indicator §
• Automatic car lighting
• Single floor designated car homing
• Uninterruptible Power Supply (UPS) for car lowering and automatic car gate/door operation (if provided) in the event of a power failure*

• Car size up to 15 square feet
• 7’0” interior car height
• Birch, Oak or Maple flat veneer interior walls with flat ceiling*
• Matching wood handrail
• Matching wood car sill
• Unfinished plywood floor with sill set for ³⁄₄” (flooring by others)
• Two energy-saving recessed LED lights with Black trim rings
• Light Oak, Birch or White 7’0” laminate accordion door

• Modular 6-1/4 pound T-rail structure
• Car frame assembly
• 208/230 VAC, 60 Hz, 20 amp, single-phase power supply for motor controller
• 120 VAC, 60 Hz, 15 amp, single-phase power supply
• Code-compliant electrical disconnects included*
• Two #60 roller chains (9,920 lbs. breaking strength)
• Inverter-controlled variable speed Inline Gear Drive unit with counterweight and 2 HP motor
• Manual lowering device

• Up to six stops
• Single automatic push-button operation
• Custom car size up to 18 square feet**
• Custom car height
• Shaker, Recessed or Raised panel car with flat ceiling
• Shaker, Recessed or Raised panel car with matching ceiling
• Four recessed LED lights with Black, White, Polished Brass, Brushed Nickel or Bronze trim rings
• Factory-finished car
• Fixtures including COPs, hall stations, phone boxes and handrails available in:
  • Polished or Blackened Stainless Steel
  • Brushed, Polished or Oil-Rubbed Solid Brass
  • Powder-coated Black or Vintage Bronze
• COP with integrated keypad phone
• Custom wood interiors
• Custom factory finish, Distressed*
• “Green” material alternatives and finishes for car interiors*
• ³⁄₄  inch finished or unfinished installed hardwood car flooring
• Custom sill heights
• Buffer springs (requires minimum of 71⁄8 inch pit depth)
• Key switch for COP and/or hall stations
• Light curtain monitoring the car entrance

• Symmetry Safety 3-Panel car door
• Two or three speed car door or car and landing doors
• Enterprise collapsible gate
• Dark Oak, Chalk, Antique White, Cherry, Walnut or Black laminate accordion door
• Hardwood veneer accordion door
• Clear or Smoked acrylic panel accordion door
• Automatic car gate/door operator (not available on the Enterprise collapsible gate)

NOTE: Accordion doors will have Bronze hardware except on White, Chalk or Antique White doors. Clear acrylic accordion doors will have Clear hardware when Stainless Steel or Black fixtures are provided.

Symmetry warrants the Roped Hydraulic, Inline Gear Drive and Winding Drum Residential Elevators to be free from defects in material and workmanship under normal use and service for a period of three (3) years.